| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | DIFFERENTIAL RING GEAR | - | ( )
|
- | - |
| *1 | DIFFERENTIAL CASE SUB-ASSEMBLY | - | - |
| ● | Non-reusable part | - | - |
1.REMOVE DIFFERENTIAL RING GEAR
Secure the differential ring gear in a vise between aluminum plates.
Be careful not to damage the differential ring gear in the vise.
Remove the 8 bolts from the differential ring gear.
Using a plastic hammer, tap on the differential ring gear to remove it from the differential case sub-assembly.