| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | DIFFERENTIAL RING GEAR | - | ( )
|
- | - |
| *1 | DIFFERENTIAL CASE SUB-ASSEMBLY | ||
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) | - | - |
1.INSTALL DIFFERENTIAL RING GEAR
Temporarily install the differential ring gear to the differential case sub-assembly with the 8 bolts.
Secure the differential ring gear in a vise between aluminum plates.
Be careful not to damage the differential ring gear in the vise.
Tighten the 8 bolts.