Home › Drivetrain › K320 (MULTIDRIVE / CVT) › REVOLUTION SENSOR (NC1 SENSOR)
RM3700E _52 Drivetrain _092906 K320 MULTIDRIVE / CVT _0438046 REVOLUTION SENSOR(NC1 SENSOR) A

K320 MULTIDRIVE / CVT  REVOLUTION SENSOR(NC1 SENSOR)  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
C428877N04
1.5,3.885 2.083,3.885 false 2.833,2.917 3,3.167 3,3.167 3.167,3.167 false 2.125,3.75 2.406,4.104 0.281,0.354 18 false 1 3.219,3.042 3.5,3.396 0.281,0.354 18 false 2

Procedure Part Name Code
Z101186

Z101188

Z101187

1 TRANSMISSION VALVE BODY ASSEMBLY 35410J - - -
2 TRANSMISSION REVOLUTION SENSOR (NC1) 89413S - - -

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the transmission revolution sensor (NC1) removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Procedure Necessary Procedure Effect/Inoperative when not Performed Link
Air intake system parts Inspection After Repair
·

Poor idle, etc.

·

Engine start function, etc.


(Click here)
Replacement of CVT fluid ATF thermal degradation estimate reset The value of the Data List item "ATF Thermal Degradation Estimate" is not estimated correctly (Click here)

PROCEDURE

Hide 35410J 1.REMOVE TRANSMISSION VALVE BODY ASSEMBLY

Hide 89413S 2.REMOVE TRANSMISSION REVOLUTION SENSOR (NC1)

a.
C431083