1.ADJUST STEERING WHEEL POSITION
|
Lower |
|
Extend |
Adjust steering wheel position by the below procedure.
1. Release the tilt and telescopic lever and fully extend and lower the steering column sub-assembly.
2. Lock the tilt and telescopic lever.
45287
2.REMOVE LOWER STEERING COLUMN COVER
|
|
|
Push |
|
Push Area |
Turn the steering wheel assembly to the left and remove the screw.
Turn the steering wheel assembly to the right and remove the screw.
Remove the screw.
Disengage the claws to remove the lower steering column cover as show in the illustration.
45286B
3.REMOVE UPPER STEERING COLUMN COVER
84650
4.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY
|
Remove in this Direction | - | - |
Turn the steering wheel assembly to the left.
Using a screwdriver with its tip wrapped with protective tape, disengage the claw to remove the windshield wiper switch assembly as shown in the illustration.
If the claw is pulled with excessive force, it may break.