| ● | Non-reusable part | - | - |
1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM
86520
2.REMOVE LOW PITCHED HORN ASSEMBLY
Click hereVehicle Exterior>HORN>HORN>REMOVAL
53510
3.REMOVE HOOD LOCK ASSEMBLY
52611
4.REMOVE FRONT BUMPER ENERGY ABSORBER
52131A
5.REMOVE FRONT BUMPER REINFORCEMENT
16681A
6.REMOVE RADIATOR UPPER AIR GUIDE PLATE
16562L
7.REMOVE NO. 2 RADIATOR TO SUPPORT SEAL
16595D
8.REMOVE NO. 1 RADIATOR AIR GUIDE LH
16561D
9.REMOVE NO. 1 RADIATOR TO SUPPORT SEAL
53036C
10.REMOVE FRONT END PANEL MOUNTING BRACKET SUB-ASSEMBLY LH
53035C
11.REMOVE FRONT END PANEL MOUNTING BRACKET SUB-ASSEMBLY RH
88711
12.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
Remove the bolt to disconnect the No. 1 cooler refrigerant discharge hose from the cooler condenser assembly.
Remove the O-ring from the No. 1 cooler refrigerant discharge hose.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
88710E
13.DISCONNECT AIR CONDITIONING TUBE AND ACCESSORY ASSEMBLY
Remove the bolt to disconnect the air conditioning tube and accessory assembly from the cooler condenser assembly.
Remove the O-ring from the air conditioning tube and accessory assembly.
Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.
884A0
14.REMOVE COOLER CONDENSER ASSEMBLY
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Disengage the claws and guides to remove the cooler condenser assembly as shown in the illustration.
Do not damage the cooler condenser assembly or radiator assembly when removing the cooler condenser assembly.