| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | NO. 1 ROOM LIGHT ASSEMBLY | 81240 | ( )
|
- | - |
| 2 | NO. 1 ROOM LIGHT BULB | 81240B | - | - | - |
81240
1.REMOVE NO. 1 ROOM LIGHT ASSEMBLY
| *1 | No. 1 Room Light Lens | - | - |
|
Remove in this Direction | - | - |
Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the No. 1 room light lens as shown in the illustration.
Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the No. 1 room light housing from the roof headlining.
Using a screwdriver with its tip wrapped in protective tape, disengage the claws and guide to remove the No. 1 room light housing from the No. 1 room light switch base.
81240B
2.REMOVE NO. 1 ROOM LIGHT BULB
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |