| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FRONT PILLAR UPPER COVER SUB-ASSEMBLY | 60118 | ( )
|
- | - |
| 2 | FRONT DOOR FRONT LOWER FRAME UPPER COVER | 67496C | ( )
|
- | - |
| ● | Non-reusable part | - | - |
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
60118
1.REMOVE FRONT PILLAR UPPER COVER SUB-ASSEMBLY
|
|
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Front Pillar Upper Cover Sub-assembly | 20 to 30 °C (68 to 86 °F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the vehicle body and front pillar upper cover sub-assembly excessively.
| *a | Double-sided Tape | - | - |
Apply protective tape around the front pillar upper cover sub-assembly.
Disengage the clips and separate the double-sided tape to remove the front pillar upper cover sub-assembly.
67496C
2.REMOVE FRONT DOOR FRONT LOWER FRAME UPPER COVER
Apply protective tape around the front door front lower frame upper cover.
Using a moulding remover A, disengage the clips to remove the front door front lower frame upper cover.