Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
75942B
1.REMOVE CENTER PILLAR STRIPE
|
|
| Item | Temperature |
|---|---|
·
Vehicle Body ·
Center Pillar Stripe |
40 to 60°C (104 to 140°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts.
Touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat the vehicle body excessively.
|
Warming range | - | - |
Using a heat light, heat the center pillar stripe and vehicle body.
Pull back on one of the ends of the center pillar stripe to remove it.
When pulling on the center pillar stripe, pull it parallel to the vehicle body.