| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | HOLE PLUG | - | - | - | - |
| 2 | REAR DOOR OUTSIDE MOULDING | 75742 | ( )
|
- | - |
| 3 | REAR DOOR OUTSIDE LOWER MOULDING SUB-ASSEMBLY | 75078 | ( )
|
- | - |
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE HOLE PLUG
75742
2.REMOVE REAR DOOR OUTSIDE MOULDING
|
Remove in this Direction | - | - |
Apply protective tape around the rear door outside moulding.
Remove the screw.
Disengage the clips and claw to remove the rear door outside moulding as shown in the illustration.
75078
3.REMOVE REAR DOOR OUTSIDE LOWER MOULDING SUB-ASSEMBLY
|
Remove in this Direction | - | - |
Apply protective tape around the rear door outside lower moulding sub-assembly.
Remove the nut.
Disengage the clips to remove the rear door outside lower moulding sub-assembly as shown in the illustration.