| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FRONT BUMPER ASSEMBLY | - | - | - | - |
| 2 | HEADLIGHT ASSEMBLY | 81150 | - | - | - |
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
1.REMOVE FRONT BUMPER ASSEMBLY
81150
2.REMOVE HEADLIGHT ASSEMBLY
| *A | for LH side | - | - |
|
Remove in this Direction | - | - |
Apply protective tape around the headlight assembly as shown in the illustration.
Disengage the clamps and disconnect the 4 connectors.
for LH side:
1. Disengage the clamp.
Remove the 2 screws and bolt.
Remove the headlight assembly as shown in the illustration.