| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | REAR COMBINATION LIGHT ASSEMBLY | - | ( )
|
- | - |
| 2 | REAR TURN SIGNAL LIGHT SOCKET | 81550M | - | - | - |
| 3 | REAR TURN SIGNAL LIGHT BULB | 81550L | - | - | - |
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.SEPARATE REAR COMBINATION LIGHT ASSEMBLY
| *a | Pin | *b | Guide |
|
Remove in this Direction | - | - |
Apply protective tape around the rear combination light assembly.
Remove the 2 screws.
Disengage the pin and guide to separate the rear combination light assembly as shown in the illustration.
81550M
2.REMOVE REAR TURN SIGNAL LIGHT SOCKET
|
Remove in this Direction | - | - |
81550L
3.INSTALL REAR TURN SIGNAL LIGHT BULB