| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FUEL SENDER GAUGE ASSEMBLY | 83320 | ( )
|
- | - |
| 2 | FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY | 77020A | - | - | - |
83320
1.INSTALL FUEL SENDER GAUGE ASSEMBLY
Engage the 2 claws to install the fuel sender gauge assembly to the fuel suction tube with pump and gauge assembly.
Be careful not to bend the arm of the fuel sender gauge assembly.
Connect the 2 connectors.
Engage the 4 clamps to connect the wire harness.
Do not damage the wire harness.
When engaging each wire harness to the clamp, engage one wire at a time.
77020A
2.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY