Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › SERVICE PLUG GRIP
RM3700E _51 Engine / Hybrid System _093506 HYBRID / BATTERY CONTROL _0441198 SERVICE PLUG GRIP A

HYBRID / BATTERY CONTROL  SERVICE PLUG GRIP  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
A461521N01
6.458,0.25 6.708,0.25 false 6.49,0.781 6.74,0.781 true 2.49,4.01 3.01,4.01 true 3.896,3.667 4.167,3.667 false 4.635,3.552 4.833,3.865 0.198,0.313 18 true 1 3.115,3.896 3.313,4.208 0.198,0.313 18 true 2 6.313,0.635 6.51,0.948 0.198,0.313 18 true 3 6.323,0.125 6.521,0.438 0.198,0.313 18 true 4

Procedure Part Name Code
Z101186

Z101188

Z101187

1 SERVICE PLUG GRIP G3834 (Click here) - -
2 REAR UNDER SIDE COVER LH 76974F - - -
3 CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL - (Click here) - -
4 INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL - - - (Click here)

PROCEDURE

Hide G3834 1.INSTALL SERVICE PLUG GRIP

Z101186

CAUTION:

Wear insulated gloves.


NOTICE:

Before installing the service plug grip, check that no parts or tools remain and that the high voltage terminals and connectors are connected securely.



a.
A466654N02
0.365,0.896 0.521,1.094 0.156,0.198 10 true 1 1,1.302 1.156,1.5 0.156,0.198 10 true 2 5.979,1.208 6.135,1.406 0.156,0.198 10 true 3 0.063,0.052 0.25,0.396 0.188,0.344 18 true i 4.167,0.031 4.354,0.375 0.188,0.344 18 false ii

i.

While wearing insulated gloves, and temporarily install the service plug grip as indicated by the arrow (1) shown in the illustration.


ii.

Rotate the handle of the service plug grip 90° toward the HV battery and slide it in the direction indicated by the arrow (3) shown in the illustration until a click sound is heard to install the service plug grip.



Hide 76974F 2.INSTALL REAR UNDER SIDE COVER LH

Hide 3.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

Hide 4. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART