1.REMOVE REAR WHEEL
48830
2.REMOVE REAR STABILIZER LINK ASSEMBLY (for LH Side)
Remove the bolt and nut, and separate the rear stabilizer link assembly from the rear stabilizer bar.
Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.
Remove the bolt, nut and rear stabilizer link assembly from the rear axle carrier sub-assembly and rear upper control arm assembly.
Because the nut has its own stopper, do not turn the nut. Loosen the bolt with the nut secured.
48830
3.REMOVE REAR STABILIZER LINK ASSEMBLY (for RH Side)
Perform the same procedure as for the LH side.
48812
4.REMOVE REAR STABILIZER BAR
48832A
5.REMOVE REAR NO. 1 STABILIZER BAR BRACKET
48818
6.REMOVE REAR STABILIZER BUSH