| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | ENGINE WIRE | - | - | - | - |
| 2 | CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY | 15370 | ( )
|
- | - |
| ● | Non-reusable part | ★ | Precoated part |
1.DISCONNECT ENGINE WIRE
15370
2.REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY
Disconnect the camshaft timing oil control solenoid assembly connector.
Remove the 2 bolts and camshaft timing oil control solenoid assembly from the No. 2 timing chain cover assembly.
If the camshaft timing oil control solenoid assembly has been struck or dropped, replace it.
Remove the O-ring from the camshaft timing oil control solenoid assembly connector.
If the O-ring comes off in the timing chain cover assembly, make sure to remove it.
Do not drop the O-ring into the timing chain cover assembly.