Home › Engine / Hybrid System › M15A-FKS (ENGINE CONTROL) › THROTTLE BODY
RM3700E _51 Engine / Hybrid System _093766 M15A-FKS ENGINE CONTROL _0442019 THROTTLE BODY A

M15A-FKS ENGINE CONTROL  THROTTLE BODY  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
A460398N02
3.813,1.063 4.479,1.229 0.667,0.167 2.844,0.052 3.844,0.219 1,0.167 4.969,0.813 5.969,0.979 1,0.167 2.219,3.521 3.219,3.688 1,0.167 4.552,0.552 4.885,0.552 false 3.458,0.729 3.719,1.135 3.719,1.135 3.802,1.135 false 6.427,0.688 6.76,0.688 false 6.417,0.281 6.75,0.281 false 2.635,1.552 2.969,1.552 false 2.26,0.917 2.594,0.917 false 4.604,0.979 4.604,1.469 4.604,1.469 4.531,1.469 false 3.635,1.26 3.635,1.594 false 3.083,0.802 2.969,0.302 2.969,0.302 2.802,0.302 false 6.344,1.104 6.677,1.104 false 4.729,2.594 5.063,2.594 false 4.635,0.896 4.969,0.896 false 4.115,0.74 3.938,0.125 3.938,0.125 3.854,0.125 false 3.969,3.479 3.313,3.604 3.313,3.604 3.229,3.604 false 6.146,0.125 6.344,0.448 0.198,0.323 18 false 6 6.167,0.563 6.646,0.906 0.479,0.344 18 false 7 4.969,0.375 5.448,0.719 0.479,0.344 18 false 5 4.365,1.333 4.844,1.677 0.479,0.344 18 false 4 3.563,1.604 4.042,1.948 0.479,0.344 18 false 3 2.469,1.385 2.948,1.729 0.479,0.344 18 false 2 2.052,0.854 2.344,1.083 0.292,0.229 10 false ● 2.635,0.198 3.115,0.542 0.479,0.344 18 false 1 3.865,1.073 4.521,1.25 0.656,0.177 8 false 10 (102, 7) 3.5,0.615 3.969,0.792 0.469,0.177 10 false x3 6.146,0.938 6.625,1.281 0.479,0.344 18 false 9 5.135,2.438 5.615,2.781 0.479,0.344 18 false 8 3.333,3.25 3.802,3.427 0.469,0.177 10 false x4 4.052,3.448 4.521,3.625 0.469,0.177 10 false x4 4.688,3.24 5.156,3.417 0.469,0.177 10 false x9 2.896,0.052 4.063,0.292 1.167,0.24 8 false 3.0 (31, 27 in.*lbf) 5.031,0.823 6.198,1.063 1.167,0.24 8 false 3.0 (31, 27 in.*lbf) 2.271,3.531 3.365,3.74 1.094,0.208 8 false 5.0 (51, 44 in.*lbf)

Procedure Part Name Code
Z101186

Z101188

Z101187

1 THROTTLE BODY WITH MOTOR ASSEMBLY 22030 (Click here) - -
2 NO. 8 WATER BY-PASS HOSE 16296 - - -
3 NO. 5 WATER BY-PASS HOSE 16282 - - -
4 NO. 1 AIR CLEANER HOSE 17881 (Click here) - -
5 NO. 2 VENTILATION HOSE 12262 - - -
6 ADD ENGINE COOLANT - - (Click here) -
7 INSPECT FOR COOLANT LEAK - (Click here) - -
8 NO. 1 ENGINE UNDER COVER ASSEMBLY 51410 - - -
9 PERFORM INITIALIZATION - - - (Click here)

V100146

N*m (kgf*cm, ft.*lbf): Specified torque ● Non-reusable part

CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 22030 1.INSTALL THROTTLE BODY WITH MOTOR ASSEMBLY

a.
A458778N02
0.521,0.115 0.708,0.417 0.188,0.302 18 true i 4.438,0.135 4.938,0.438 0.5,0.302 18 true ii, iii

i.

Install a new throttle body gasket to the intake manifold with the protrusion of the throttle body gasket oriented as shown in the illustration.


ii.

Using an 8 mm socket wrench, install the throttle body with motor assembly to the intake manifold with the 3 bolts.

NOTICE:

If the throttle body with motor assembly has been struck or dropped, replace it.


Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


iii.

Connect the throttle body with motor assembly connector.



Hide 16296 2.CONNECT NO. 8 WATER BY-PASS HOSE

Hide 16282 3.CONNECT NO. 5 WATER BY-PASS HOSE

Hide 17881 4.INSTALL NO. 1 AIR CLEANER HOSE

a.
A458777C03
2.344,1.927 2.656,2.125 0.313,0.198 10 false *a 5.052,1.604 5.365,1.802 0.313,0.198 10 false *a 4.604,2.031 4.917,2.229 0.313,0.198 10 false *b 2.792,2.417 3.104,2.615 0.313,0.198 10 false *b
*a Top of Vehicle *b Front of Vehicle


i.

Install the No. 1 air cleaner hose to the throttle body with motor assembly and tighten the hose clamp.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)

NOTICE:

Align the cutout of the air cleaner hose with the protrusion of the throttle body with motor assembly as shown in the illustration.




Hide 12262 5.CONNECT NO. 2 VENTILATION HOSE

Hide 6.ADD ENGINE COOLANT

Hide 51410 8.INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY

Hide 9.PERFORM INITIALIZATION

NOTICE:
·

Be sure to perform this procedure after removing and reinstalling the throttle body with motor assembly or any throttle body with motor assembly components.

·

Perform the following procedure after replacing the throttle body with motor assembly or any throttle body with motor assembly components. The following procedure should also be performed if the throttle body with motor assembly is cleaned.



a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch on (IG).


c.

Turn the GTS on.


d.

Clear the DTCs.

Powertrain > Engine > Clear DTCs
50002 372

e.

f.

Start the engine and check that the MIL is not illuminated. After the engine is warmed up, check that the idle speed is within the specified range with the A/C switch off.

Standard Idle Speed:
for Manual Transaxle:

790 to 890 rpm

for CVT:

830 to 930 rpm


NOTICE:
·

Be sure to perform this step with all accessories off.

·

Make sure that the shift lever is in P or N.




g.

Enter the following menus: Powertrain / Engine / Data List / Throttle Position Sensor No.1 Voltage %.

Powertrain > Engine > Data List
Tester Display
Throttle Position Sensor No.1 Voltage %
50003 372 216

h.

According to the display on the GTS, read the Data List while fully depressing the accelerator pedal and check that the value is 60% or higher.


i.

Perform a road test and confirm that there are no abnormalities.