| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | NO. 1 ECM BRACKET | 89667E | - | - | - |
| 2 | NO. 2 ECM BRACKET | 89668 | - | - | - |
| 3 | ECM | 89661 | ( )
|
- | - |
| 4 | BATTERY | 28800 | - | - | - |
| 5 | UPDATE ECU SECURITY KEY | - | - | - | ( )
|
| 6 | PERFORM INITIALIZATION | - | - | - | ( )
|
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
After performing the update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) auxiliary battery terminal.
89667E
1.INSTALL NO. 1 ECM BRACKET
89668
2.INSTALL NO. 2 ECM BRACKET
89661
3.INSTALL ECM
Install the bolt and 2 nuts.
Connect the 2 ECM connectors and lower the 2 lock levers.
When connecting the ECM connectors, make sure that dirt, water or other foreign matter does not contact the connecting parts of the ECM connectors.
Be sure to securely connect the ECM connectors.
Engage the 2 clamps.
28800
4.INSTALL BATTERY
5. UPDATE ECU SECURITY KEY
6.PERFORM INITIALIZATION