Home › Engine / Hybrid System › M15A-FXE (ENGINE CONTROL) › CAMSHAFT POSITION SENSOR
RM3700E _51 Engine / Hybrid System _093768 M15A-FXE ENGINE CONTROL _0442038 CAMSHAFT POSITION SENSOR A

M15A-FXE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
A459208N04
5.219,1.677 5.323,1.938 5.323,1.938 5.49,1.938 false 5.292,0.625 5.417,0.49 5.417,0.49 5.583,0.49 false 3.844,0.625 3.969,0.49 3.969,0.49 4.135,0.49 false 3.104,1.583 3.521,1.583 false 2.521,1.292 3.542,1.292 false 5.302,1.354 5.875,1.354 false 2.344,1.177 2.625,1.531 0.281,0.354 18 false 2 6.271,1.24 6.552,1.594 0.281,0.354 18 false 1 5.656,0.427 6,0.625 0.344,0.198 10 false ●★ 4.198,0.427 4.521,0.625 0.323,0.198 10 false ●★ 5.542,1.875 5.885,2.073 0.344,0.198 10 false ● 2.938,1.521 3.281,1.719 0.344,0.198 10 false ●

Procedure Part Name Code
Z101186

Z101188

Z101187

1 CAMSHAFT POSITION SENSOR (for Intake Side) 11102A (Click here) - -
2 CAMSHAFT POSITION SENSOR (for Exhaust Side) 11102A (Click here) - -

● Non-reusable part ★ Precoated part

CAUTION / NOTICE / HINT

NOTICE:

This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


PROCEDURE

Hide 11102A 1.REMOVE CAMSHAFT POSITION SENSOR (for Intake Side)

a.
A458727N02
0.979,0.188 1.26,0.542 0.281,0.354 18 false iii 4.51,0.156 4.833,0.427 0.323,0.271 18 true i, ii

i.

Disconnect the camshaft position sensor connector.


ii.

Using an 8 mm socket wrench, remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

NOTICE:

If the camshaft position sensor has been struck or dropped, replace it.



iii.

Remove the O-ring from the camshaft position sensor.

NOTICE:
·

Make sure to only remove the O-ring with bare hands.

·

When removing the O-ring, be careful not to damage the O-ring groove of the camshaft position sensor.

·

If the O-ring groove of the camshaft position sensor is damaged, replace the camshaft position sensor with a new one.





Hide 11102A 2.REMOVE CAMSHAFT POSITION SENSOR (for Exhaust Side)

a.
A458728N02
0.99,0.177 1.323,0.438 0.333,0.26 18 false iii 4.521,0.156 4.906,0.448 0.385,0.292 18 true i, ii

i.

Disconnect the camshaft position sensor connector.


ii.

Using an 8 mm socket wrench, remove the bolt and camshaft position sensor from the cylinder head cover sub-assembly.

NOTICE:

If the camshaft position sensor has been struck or dropped, replace it.



iii.

Remove the O-ring from the camshaft position sensor.

NOTICE:
·

Make sure to only remove the O-ring with bare hands.

·

When removing the O-ring, be careful not to damage the O-ring groove of the camshaft position sensor.

·

If the O-ring groove of the camshaft position sensor is damaged, replace the camshaft position sensor with a new one.