| *1 | BRAKE MASTER CYLINDER BODY | - | - |
| ● | Non-reusable part |
|
Lithium soap base glycol grease |
47299
1.INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER
47230
2.INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
47255
3.INSTALL MASTER CYLINDER RESERVOIR GROMMET
|
Lithium Soap Base Glycol Grease | - | - |
Apply a light layer of lithium soap base glycol grease to the entire circumference of 2 new master cylinder reservoir grommets.
Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir assembly.
47220D
4.INSTALL BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
|
|
47201C
5.INSTALL BRAKE MASTER CYLINDER RING PIN
|
|
Mount the brake master cylinder body in a vise.
Using a 5 mm pin punch and a hammer, tap in the brake master cylinder ring pin to secure the brake master cylinder reservoir assembly.
Remove the brake master cylinder sub-assembly from the vise.