| *1 | STARTER DRIVE HOUSING ASSEMBLY | - | - |
28226B
1.REMOVE MAGNET STARTER SWITCH ASSEMBLY
| *1 | Pinion Drive Lever | *2 | Hook |
Remove the 2 bolts.
While lifting the rear of the magnet starter switch assembly remove the hook from the pinion drive lever, and then remove the magnet starter switch assembly.
2.REMOVE STARTER YOKE ASSEMBLY
3.REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY
4.REMOVE STARTER BRUSH HOLDER ASSEMBLY
| *a | Hammer | - | - |
Remove the starter yoke assembly while holding down the starter armature assembly and starter brush holder assembly with the handle of a hammer.
The starter armature assembly will be attracted by the magnetic field of the starter yoke assembly. Hold the starter armature assembly with the handle of the hammer.
28160
5.REMOVE STARTER ARMATURE ASSEMBLY
28021
6.REMOVE STARTER CENTER BEARING CLUTCH SUB-ASSEMBLY