| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | IGNITION COIL ASSEMBLY | 19500 | ( )
|
- | - |
| 2 | SPARK PLUG | 19100P | ( )
|
- | - |
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during ignition coil assembly or spark plug removal/installation are shown below.
This procedure includes the removal of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
19500
1.REMOVE IGNITION COIL ASSEMBLY
19100P
2.REMOVE SPARK PLUG
|
|