| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | SPARK PLUG | 19100P | ( )
|
- | - |
| 2 | IGNITION COIL ASSEMBLY | 19500 | ( )
|
- | - |
| 3 | PERFORM INITIALIZATION | - | - | - | ( )
|
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
This procedure includes the installation of small-head bolts. Refer to Small-Head Bolts of Basic Repair Hint to identify the small-head bolts.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
19100P
1.INSTALL SPARK PLUG
|
|
Install the 3 spark plugs to the cylinder head sub-assembly.
Install the same parts to their original positions.
3.PERFORM INITIALIZATION
Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.
Click hereEngine / Hybrid System>M15A-FXE (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION