|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
86101Q
1.INSTALL NO. 4 ANTENNA CORD SUB-ASSEMBLY
| *a | Nonwoven Tape | *b | Rope |
|
Install in this Direction | - | - |
Secure a rope to the No. 4 antenna cord sub-assembly with nonwoven tape as shown in the illustration.
As conduction performance may degrade if adhesive from the nonwoven tape contacts the connecting parts of the connector, cover the connector with a plastic bag or similar before applying the nonwoven tape.
Make sure that the rope is secured with nonwoven tape to prevent the rope from separating from the No. 4 antenna cord sub-assembly when removing it.
Install the No. 4 antenna cord sub-assembly as shown in the illustration.
This step should not be performed with the back door panel sub-assembly removed from the vehicle.
Engage the claws to install the 2 grommets.
Engage the clamp.
86101R
2.INSTALL NO. 5 ANTENNA CORD SUB-ASSEMBLY
86101V
3.INSTALL NO. 6 ANTENNA CORD SUB-ASSEMBLY
67751
4.INSTALL BACK DOOR TRIM BOARD