| *A | for Automatic Air Conditioning System | *B | for Manual Air Conditioning System |
| *1 | TELEMATICS TRANSCEIVER | - | - |
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the telematics transceiver removal/installation are shown below.
55900
2.REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)
55406B
3.REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)
4.REMOVE TELEMATICS TRANSCEIVER WITH BRACKET
86719A
5.REMOVE NO. 1 TELEPHONE BRACKET
86719B
6.REMOVE NO. 2 TELEPHONE BRACKET