| *A | for Gasoline Model | *B | for HV Model |
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 12 | SPARE WHEEL COVER | 64771G | - | - | - |
| 13 | DECK BOARD SET SUPPORT | 58393E | - | - | - |
| 14 | DECK BOARD ASSEMBLY | 58410B | - | - | - |
| *A | w/ Deck Board | *B | for Separate Type |
| *C | for Integrated Type | *D | w/ Cover |
71305A
1.INSTALL REAR SEATBACK CENTER HINGE SUB-ASSEMBLY
Temporarily install the rear seatback center hinge sub-assembly with the 3 bolts.
Tighten the 3 bolts in the order shown in the illustration.
Engage the clamp.
73705B
2.INSTALL CROSS ANCHOR BRACKET SUB-ASSEMBLY
Temporarily install the cross anchor bracket sub-assembly with the 2 bolts.
Tighten the 2 bolts in the order shown in the illustration.
72693
3.INSTALL REAR SEAT CUSHION LOCK HOOK
71940A
6.INSTALL REAR SEAT HEADREST ASSEMBLY
71349E
8.INSTALL REAR SEAT BACK HINGE COVER
73350C
9.CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
71960B
10.INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
71940A
11.INSTALL REAR SEAT HEADREST ASSEMBLY
64771G
12.INSTALL SPARE WHEEL COVER (w/ Cover)
58393E
13.INSTALL DECK BOARD SET SUPPORT (w/ Deck Board)
58410B
14.INSTALL DECK BOARD ASSEMBLY (w/ Deck Board)