| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 8 | BENCH TYPE REAR SEAT CUSHION ASSEMBLY | - | ( )
|
- | - |
| 9 | REAR SEAT CUSHION LOCK HOOK | 72693 | - | - | - |
| *A | for Gasoline Model | *B | for HV Model |
| ● | Non-reusable part | - | - |
71940A
1.REMOVE REAR SEAT HEADREST ASSEMBLY
71960B
2.REMOVE REAR SEAT CENTER HEADREST ASSEMBLY
73350C
3.DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY
| *a | Protective Tape | - | - |
71349E
4.REMOVE REAR SEAT BACK HINGE COVER
5.REMOVE REAR SEATBACK ASSEMBLY RH
|
Hook and Loop Fastener | - | - |
Fold the rear seatback assembly RH forward.
Disengage the hook and loop fastener.
Remove the 2 bolts.
Disengage the guides to remove the rear seatback assembly RH.
Be careful not to damage the vehicle body.
71940A
6.REMOVE REAR SEAT HEADREST ASSEMBLY
7.REMOVE REAR SEATBACK ASSEMBLY LH
|
Hook and Loop Fastener | - | - |
Fold the rear seatback assembly LH forward.
Disengage the hook and loop fasteners.
Remove the 2 bolts.
Disengage the guides to remove the rear seatback assembly LH.
Be careful not to damage the vehicle body.
8.REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY
for Gasoline Model:
| *a | Rear Seat Cushion Frame Hook Front Side | *b | Rear Seat Cushion Frame Hook Rear Side |
|
Place Hands Here |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) | - | - |
Disconnect the connectors.
Lift the front edge of the bench type rear seat cushion assembly as shown in the illustration and disengage the rear seat cushion frame hooks on the front side and guides of the bench type rear seat cushion assembly from the rear seat cushion lock hooks.
Be sure to hold the parts of the seat cushion assembly directly next to the rear seat cushion frame hooks when lifting it. Lifting a different part of the cushion may deform the rear seat cushion frame.
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 60 mm (2.36 in.) | B | 80 mm (3.15 in.) |
Disengage the rear seat cushion frame hook on the rear side of the bench type rear seat cushion assembly as shown in the illustration.
Be careful not to damage the bench type rear seat cushion assembly, body exterior or interior parts.
for HV Model:
| *a | Rear Seat Cushion Frame Hook Front Side | *b | Rear Seat Cushion Frame Hook Rear Side |
|
Place Hands Here |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) | - | - |
Disconnect the connectors.
Lift the front edge of the bench type rear seat cushion assembly as shown in the illustration and disengage the rear seat cushion frame hooks on the front side of the bench type rear seat cushion assembly from the rear seat cushion lock hooks.
Be sure to hold the parts of the seat cushion assembly directly next to the rear seat cushion frame hooks when lifting it. Lifting a different part of the cushion may deform the rear seat cushion frame.
| Area | Measurement | Area | Measurement |
|---|---|---|---|
| A | 60 mm (2.36 in.) | B | 80 mm (3.15 in.) |
Disengage the rear seat cushion frame hook on the rear side of the bench type rear seat cushion assembly as shown in the illustration.
Be careful not to damage the bench type rear seat cushion assembly, body exterior or interior parts.
72693
9.REMOVE REAR SEAT CUSHION LOCK HOOK