Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HYBRID CONTROL SYSTEM › 2020.08–2021.07
RM3700E _51 Engine / Hybrid System _093506 HYBRID / BATTERY CONTROL _0441183 HYBRID CONTROL SYSTEM C

HYBRID / BATTERY CONTROL  HYBRID CONTROL SYSTEM  C134800  Different Diameter Tire  


DESCRIPTION

If the hybrid vehicle control ECU receives a signal from the brake booster with master cylinder assembly (skid control ECU assembly) that the AWD system is malfunctioning, the hybrid vehicle control ECU outputs this DTC.

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate DTC Output from Priority
C134800 Different Diameter Tire The vehicle is being driven in a straight line at a constant speed of 30 km/h (19 mph) or more, and the wheel speeds differ between front and rear significantly.
(1 trip detection logic)
·

Tire and wheel size

·

Tire pressure

·

Speed sensor circuit

·

Hybrid vehicle control ECU


Does not come on Master Warning:
Does not come on
Hybrid Control A

PROCEDURE

1.CHECK TIRES

Pre-procedure1

a.

Check the tire sizes to ensure that the front and rear tire sizes are not different.

Click hereSuspension>TIRE / WHEEL>TIRE AND WHEEL SYSTEM>INSPECTION

HINT:

If different tire sizes are discovered, replace the tires so that the tire sizes are the same on all 4 wheels.



Procedure1

a.

Adjust the air pressure in the tires.

Click hereSuspension>TIRE / WHEEL>TIRE AND WHEEL SYSTEM>INSPECTION

Result:
Proceed to
NEXT



Post-procedure1

a.

None.



NEXT

2.CLEAR DTC
2.CLEAR DTC

Pre-procedure1

a.

None.


Procedure1

a.

Clear the DTCs.

Powertrain > Hybrid Control > Clear DTCs
50002 397
Result:
Proceed to
NEXT



Post-procedure1

a.

Turn the ignition switch off and wait for 2 minutes or more.



NEXT

3.RECONFIRM DTC (HYBRID CONTROL)
3.RECONFIRM DTC (HYBRID CONTROL)

Pre-procedure1

a.

Drive the vehicle at a speed of 30 km/h (19 mph) or more.


Procedure1

a.

Check if the same DTC is output.

Powertrain > Hybrid Control > Trouble Codes
50001 397
HINT:

When a DTC has been stored, the vehicle condition when the DTC was stored can be determined from the freeze frame data.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>HYBRID CONTROL SYSTEM>FREEZE FRAME DATA


Result:
Result Proceed to
C134800 is not output A
C134800 is output B



Post-procedure1

a.

None.



A

B

4.RECONFIRM DTC (ELECTRONICALLY CONTROLED BRAKE)
4.RECONFIRM DTC (ELECTRONICALLY CONTROLED BRAKE)

Pre-procedure1

a.

NONE


Procedure1

a.

Check that no speed sensor DTCs are output.

Chassis > Brake/EPB > Trouble Codes
50001 435
HINT:
·

If C134800 and electronically controlled brake system DTCs are output simultaneously, check and repair the trouble areas in the electronically controlled brake system.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)>DIAGNOSTIC TROUBLE CODE CHART

·

When a DTC has been stored, the vehicle condition when the DTC was stored can be determined from the freeze frame data.

Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)>FREEZE FRAME DATA



Result:
Result Proceed to
Speed sensor DTC are not output. A
Speed sensor DTC is output. B



Post-procedure1

a.

None.



A

B