Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for Gasoline Model)
RM3700E _95 ADAS / AD _095278 ADVANCED DRIVER ASSISTANCE SYSTEM _0447902 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model) C

ADVANCED DRIVER ASSISTANCE SYSTEM  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model)  P160700  Cruise Control Input Processor  


DESCRIPTION

When the ECM detects that it is not functioning normally, DTC P160700 is stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
P160700 Cruise Control Input Processor When the ignition switch is ON and control of vehicle speed by the dynamic radar cruise control system is prohibited by the sub-CPU, the dynamic radar cruise control system operates for 0.3 seconds or more. ECM Radar Cruise1 A

CAUTION / NOTICE / HINT

NOTICE:

Before replacing the ECM, refer to Service Bulletin.


HINT:

Read the freeze frame data using the GTS. When a malfunction is detected, various engine control parameters are stored as freeze frame data and can be useful for troubleshooting.


PROCEDURE

1.CLEAR DTC
a.

Clear the DTCs.

Powertrain > Radar Cruise1 > Clear DTCs
50002 374

Result:
Proceed to
NEXT



NEXT

2.CHECK FOR DTCs
2.CHECK FOR DTCs

Pre-procedure1

a.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



Procedure1

a.

Check for DTCs.

Powertrain > Radar Cruise1 > Trouble Codes
50001 374
Result:
Result Proceed to
P160700 is not output A
P160700 is output B



Post-procedure1

a.

None.



A

B