Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › FRONT CAMERA
RM3700E _95 ADAS / AD _095278 ADVANCED DRIVER ASSISTANCE SYSTEM _0448462 FRONT CAMERA A

ADVANCED DRIVER ASSISTANCE SYSTEM  FRONT CAMERA  REMOVAL  


CAUTION / NOTICE / HINT

COMPONENTS (REMOVAL)
B590239N01
2,0.635 2.292,0.635 false 5.74,3.146 6.135,3.146 false 2.927,1.75 3.26,1.75 false 4.781,2.292 5.188,2.292 false 2.667,0.448 2.948,0.802 0.281,0.354 18 false 4 3.302,1.615 3.583,1.969 0.281,0.354 18 false 3 6.448,3.01 6.729,3.365 0.281,0.354 18 false 1 5.51,2.135 5.792,2.49 0.281,0.354 18 false 2

Procedure Part Name Code
Z101186

Z101188

Z101187

1 NO. 2 FORWARD RECOGNITION COVER 86466E (Click here) - -
2 NO. 2 FORWARD RECOGNITION COVER 86466D (Click here) - -
3 FORWARD RECOGNITION LATCH 86464A - - -
4 FORWARD RECOGNITION CAMERA 8646C (Click here) - -

CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are replaced during forward recognition camera removal/installation are shown below.

Necessary Procedure After Parts Removed/Installed/Replaced
Replacement Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link

*When only removing and installing the forward recognition camera, it is not necessary to perform forward recognition camera optical axis learning.

Forward recognition camera* Adjust forward recognition camera
·

Dynamic Radar Cruise Control System

·

Front Camera System

·

Lane Tracing Assist System

·

Road Sign Assist System

·

Pre-collision System

·

Automatic High Beam System


One Time Recognition:(Click here)
Sequential Recognition:(Click here)
Driving Adjustment:(Click here)
Update ECU security key Vehicle control history (RoB) are stored (Click here)

NOTICE:
·

When replacing the forward recognition camera, replace it with a new one.

·

Do not touch the camera lens or the front windshield glass in front of the camera.

·

If the forward recognition camera has been struck or dropped, replace it with a new one.

·

When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket. Also, the front camera system, pre-collision system, dynamic radar cruise control system, lane tracing assist system, road sign assist system or automatic high beam system may not operate properly due to a difference in the transmissivity or black ceramic border.



PROCEDURE

Hide 86466E 1.REMOVE NO. 2 FORWARD RECOGNITION COVER

Z101186

NOTICE:

If these claws are disengaged separately, they may break. Insert a molding remover between them and pull it down to disengage the claws simultaneously.



a.
B586142C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)



Hide 86466D 2.REMOVE NO. 1 FORWARD RECOGNITION COVER

Z101186

NOTICE:

To avoid damaging the guides, always slide the No. 1 forward recognition cover parallel to the windshield glass.



a.
B586143C01
0,0 0,0 false
V113147

Remove in this Direction (1) - -



Hide 86464A 3.REMOVE FORWARD RECOGNITION LATCH

a.
B586144C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)



Hide 8646C 4.REMOVE FORWARD RECOGNITION CAMERA

Z101186

NOTICE:
·

If the forward recognition camera has been struck or dropped, replace it with a new one.

·

Do not pull the harness forcibly when disconnecting the connector.

·

Do not touch the camera lens.

·

If the forward recognition camera bracket is deformed or damaged, replace it together with the windshield glass.




a.
B586145C01
0,0 0,0 false
V113147

Remove in this Direction - -