| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY | 86401 | ( )
|
- | - |
| 2 | FORWARD RECOGNITION CAMERA | 8646C | - | - | - |
86401
1.INSTALL FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY
| *a | Guide | *b | Clamp |
|
Install in this Direction (1) |
|
Install in this Direction (2) |
|
Heater Area | - | - |
Engage the guides in the direction indicated by the arrow (1) shown in the illustration.
|
Inner Surface of Forward Recognition with Heater Hood Sub-assembly |
Do not touch the inner surface of the forward recognition with heater hood sub-assembly.
Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.
Engage the claws in the direction indicated by the arrow (2) shown in the illustration.
Make sure that the 2 claws are engaged as shown in the illustration. Failure to do so may result in the malfunction of systems that use the forward recognition camera.
Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.
Engage the guides in the order shown in the illustration.
Do not forcibly pull the wire harness as it may become damaged.
As the No. 1 forward recognition cover cannot be installed correctly if the guides are not engaged securely, make sure to engage each guide securely.
Engage the clamp to install the forward recognition with heater hood sub-assembly.
As the No. 1 forward recognition cover cannot be installed correctly if the clamp is not engaged securely, make sure to engage the clamp securely.
Connect the connector.
8646C
2.INSTALL FORWARD RECOGNITION CAMERA