|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
88211B
1.INSTALL MILLIMETER WAVE RADAR SENSOR ASSEMBLY
|
|
|
Bolt |
|
Screw |
Engage the guides to temporarily install the millimeter wave radar sensor assembly.
Install the millimeter wave radar sensor assembly with the 2 bolts and screw.
Tighten the bolts and screw in the order shown in the illustration.
Connect the connector.
2.INSTALL FRONT BUMPER ASSEMBLY
3. UPDATE ECU SECURITY KEY
88211B
4.ADJUST MILLIMETER WAVE RADAR SENSOR ASSEMBLY
When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the radar sensor beam axis must be performed.
Millimeter wave radar sensor assembly Learning can be performed by using either Triangle Target or Flat Surface Target or Driving Adjustment.
Triangle Target:
Flat Surface Target:
Driving Adjustment:
Click hereADAS / AD>ADVANCED DRIVER ASSISTANCE SYSTEM>MILLIMETER WAVE RADAR SENSOR>DRIVING ADJUSTMENT