1.REMOVE FRONT DRIVE SHAFT ASSEMBLY
43420H
2.REMOVE FRONT DRIVE SHAFT OIL SEAL LH
Using SST, remove the front drive shaft oil seal LH from the manual transaxle assembly.
43410M
3.REMOVE FRONT DRIVE SHAFT OIL SEAL RH
Using SST, remove the front drive shaft oil seal RH from the manual transaxle assembly.
43420H
4.INSTALL FRONT DRIVE SHAFT OIL SEAL LH
Using SST and a hammer, install a new front drive shaft oil seal LH to the manual transaxle assembly.
2.3 to 3.3 mm (0.0906 to 0.130 in.)
| *a | Correct |
| *b | Incorrect |
| *c | Outer Lip |
Make sure that the outer lip of the front drive shaft oil seal LH is not pinched by SST.
Do not allow foreign matter to attach to the inner lip and outer lip of the front drive shaft oil seal LH.
Do not install the front drive shaft oil seal LH at an angle.
Do not remove the grease from the inner lip and outer lip of the front drive shaft oil seal LH.
Do not damage the front drive shaft oil seal LH lip.
43410M
5.INSTALL FRONT DRIVE SHAFT OIL SEAL RH
Using SST and a hammer, install a new front drive shaft oil seal RH to the manual transaxle assembly.
-0.5 to 0.5 mm (-0.0197 to 0.0197 in.)
| *a | Correct |
| *b | Incorrect |
| *c | Outer Lip |
Make sure that the outer lip of the front drive shaft oil seal RH is not pinched by SST.
Do not allow foreign matter to attach to the inner lip and outer lip of the front drive shaft oil seal RH.
Do not install the front drive shaft oil seal RH at an angle.
Do not remove the grease from the inner lip and outer lip of the front drive shaft oil seal RH.
Do not damage the front drive shaft oil seal RH lip.
6.INSTALL FRONT DRIVE SHAFT ASSEMBLY