| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | INNER NO. 2 SHIFT LEVER | 33252A | ( )
|
- | - |
| 2 | RELEASE HEAD STRAIGHT PIN | 33237D | ( )
|
- | - |
| 3 | SELECT STOPPER BLOCK | 33288 | ( )
|
- | - |
| *1 | SLOTTED SPRING PIN | *2 | FRONT INNER SHIFT LEVER |
| *3 | RELEASE HEAD TORSION SPRING | *4 | RELEASE HEAD |
| *5 | SHIFT AND SELECT LEVER SHAFT | - | - |
33252A
1.REMOVE INNER NO. 2 SHIFT LEVER
|
|
Secure the shift and select lever shaft in a vise between aluminum plates.
Do not overtighten the vise.
Using a 5 mm pin punch and hammer, remove the slotted spring pin and inner No. 2 shift lever from the shift and select lever shaft.
33237D
2.REMOVE RELEASE HEAD STRAIGHT PIN
|
Turn |
|
Remove in this Direction |
Using a 5 mm pin punch and hammer, remove the slotted spring pin from the select stopper block.
Using a 5 mm pin punch and hammer, remove the slotted spring pin from the front inner shift lever.
Secure the shift and select lever shaft in a vise between aluminum plates.
Do not overtighten the vise.
Turn the release head clockwise.
Slide the select stopper block upwards and remove the release head straight pin from the front inner shift lever.
33288
3.REMOVE SELECT STOPPER BLOCK
|
|
| *1 | Front Inner Shift Lever | *2 | Release Head Torsion Spring |
| *3 | Release Head | *4 | Select Stopper Block |
| *5 | Shift and Select Lever Shaft | - | - |
Remove the front inner shift lever, release head torsion spring, release head and select stopper block from the shift and select lever shaft.