Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › BRAKE ACTUATOR (for HV Model TMC Made RHD) › from 2021.07
RM3700E _54 Brake _093745 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0480812 BRAKE ACTUATOR(for HV Model TMC Made RHD) A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  BRAKE ACTUATOR(for HV Model TMC Made RHD)  INSTALLATION  


CAUTION / NOTICE / HINT

C442403N02
5.917,4.51 6.927,4.677 1.01,0.167 5.875,4.469 6.969,4.719 1.094,0.25 5.865,3.969 6.875,4.135 1.01,0.167 5.823,3.927 6.917,4.177 1.094,0.25 1.427,4.177 2.438,4.344 1.01,0.167 1.385,4.135 2.479,4.385 1.094,0.25 1.417,3.083 1.583,2.75 1.583,2.75 1.75,2.75 false 3.156,2.333 3.323,2.333 3.323,2.333 3.406,2.667 false 2.708,3.167 3.042,3.167 false 4.865,2.115 5.198,2.115 false 5.479,1.281 5.844,1.281 false 6.688,2.333 6.854,2.333 6.854,2.333 6.917,2.781 false 6.635,3.354 6.667,3.583 6.667,3.583 6.833,3.583 false 4.927,2.51 5.26,2.51 false 6.396,3.635 6.396,3.969 false 5.583,4.604 5.917,4.604 false 3.5,4.979 3.531,5.208 3.531,5.208 3.698,5.208 false 2.448,4.26 2.615,4.26 2.615,4.26 2.917,3.531 false 6.396,0.188 6.729,0.188 false 1.781,2.615 2.063,2.969 0.281,0.354 18 false 4 2.979,2.208 3.26,2.563 0.281,0.354 18 false 2 2.521,3.031 2.802,3.385 0.281,0.354 18 false 1 5.281,2.365 5.563,2.719 0.281,0.354 18 false 1 6.177,1.146 6.458,1.5 0.281,0.354 18 false 3 6.885,3.448 7.135,3.781 0.25,0.333 18 false 1 5.552,2 5.833,2.354 0.281,0.354 18 false 2 6.521,2.198 6.802,2.552 0.281,0.354 18 false 2 5.958,4.51 6.958,4.656 1,0.146 8 false 5.4 (55, 48 in.*lbf) 3.76,5.146 4.073,5.344 0.313,0.198 10 false *1 5.906,3.969 6.906,4.115 1,0.146 8 false 5.4 (55, 48 in.*lbf) 1.448,4.177 2.448,4.323 1,0.146 8 false 5.4 (55, 48 in.*lbf) 5.823,0.042 6.615,0.396 0.792,0.354 18 false 5 - 7

Procedure Part Name Code
Z101186

Z101188

Z101187

1 BRAKE ACTUATOR BOLT CUSHION 44546A - - -
2 NO. 1 BRAKE ACTUATOR CASE COLLAR 44521A (Click here) - -
3 BRAKE ACTUATOR ASSEMBLY 44510 (Click here) - -
4 BRAKE BOOSTER PUMP ASSEMBLY 47070 - - -
5 PERFORM CALIBRATION - (Click here) - -
6 PERFORM INITIALIZATION - (Click here) - -
7 INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL - (Click here) - -

*1 BRAKE ACTUATOR BRACKET ASSEMBLY - -
V111893

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) - -

PROCEDURE

Hide 44546A 1.INSTALL BRAKE ACTUATOR BOLT CUSHION

Hide 44521A 2.INSTALL NO. 1 BRAKE ACTUATOR CASE COLLAR

Z101186

NOTICE:

Make sure that the No. 1 brake actuator case collar is in full contact with the brake actuator bolt cushion.



Hide 44510 3.INSTALL BRAKE ACTUATOR ASSEMBLY

Z101186

NOTICE:
·

Do not remove the hole plugs of a new brake actuator assembly before connecting the brake lines because the brake actuator assembly is filled with brake fluid.

·

Do not hold the brake actuator assembly by the connector.

·

Do not drop the brake actuator assembly when carrying it.




Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)

Hide 47070 4.INSTALL BRAKE BOOSTER PUMP ASSEMBLY

Hide 6.PERFORM INITIALIZATION

Click hereBrake>PARKING BRAKE>ELECTRIC PARKING BRAKE SYSTEM (for HV Model TMC Made)>PRECAUTION

HINT:

The parking brake indicator light blinks (red) when the ignition switch is turned to ON after replacing the brake actuator assembly. Operate the electric parking brake switch assembly to turn off the parking brake indicator light.


Hide 7. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>WORK PROCEDURE

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART