| *1 | BRAKE MASTER CYLINDER BODY | - | - |
| ● | Non-reusable part | - | - |
1.REMOVE BRAKE MASTER CYLINDER RING PIN
Secure the brake master cylinder sub-assembly in a vise.
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.
Using a 5 mm pin punch and a hammer, tap out the brake master cylinder ring pin from the brake master cylinder sub-assembly.
Do not drop the brake master cylinder reservoir assembly.
47220D
2.REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
47255
3.REMOVE MASTER CYLINDER RESERVOIR GROMMET
47230
4.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
47299
5.REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER