| *1 | BRAKE MASTER CYLINDER BODY | *2 | SCREW |
| ● | Non-reusable part | - | - |
47220D
1.REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
Secure the brake master cylinder sub-assembly in a vise.
Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.
Using a T20 "TORX" socket wrench, remove the "TORX" screw and brake master cylinder reservoir assembly from the brake master cylinder body.
Do not drop the brake master cylinder reservoir assembly.
47255
2.REMOVE MASTER CYLINDER RESERVOIR GROMMET
47230
3.REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
47299
4.REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER