Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
87961
1.INSTALL OUTER MIRROR
w/ Mirror Heater:
| *A | for TMC Made | *B | for TMMF Made |
Connect each connector.
w/ Blind Spot Monitor System:
| *A | for TMC Made | *B | for TMMF Made |
Connect the connector.
| *A | for TMC Made | *B | for TMMF Made |
Engage the claws to install the outer mirror.
Do not push the outer mirror with excessive force. Doing so may break the mirror surface.
Remove the protective tape.