| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | BACK DOOR TRIM BOARD | 67751 | - | - | - |
| 2 | REAR LIGHT ASSEMBLY | 81590A | ( )
|
- | - |
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
67751
1.REMOVE BACK DOOR TRIM BOARD
81590A
2.REMOVE REAR LIGHT ASSEMBLY
| *A | for Driver Side | - | - |
|
Remove in this Direction | - | - |
Apply protective tape around the rear light assembly as shown in the illustration.
for Driver Side:
1. Disconnect the 2 connectors.
Remove the 3 nuts.
Disengage the clips and guide to remove the rear light assembly.