| *A | for CVT | *B | for Manual Transaxle |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 9 | NO. 1 BOX SIDE PANEL | - | - | - | - |
| 10 | NO. 2 BOX SIDE PANEL | 58912C | - | - | - |
| 11 | CONSOLE REAR END PANEL SUB-ASSEMBLY | 58903A | - | - | - |
| 12 | UPPER NO. 1 CONSOLE SUPPORT BRACKET | 58857A | - | - | - |
| 13 | CONSOLE BOX FRONT COVER | 58818A | - | - | - |
| 14 | NO. 2 BOX SIDE PANEL | 58912C | - | - | - |
| 15 | NO. 1 BOX SIDE PANEL | 58911A | - | - | - |
| 16 | REAR CONSOLE BOX SUB-ASSEMBLY | - | - | - | - |
| 17 | REAR UPPER CONSOLE PANEL | 58805C | - | - | - |
| 18 | REAR CONSOLE BOX ASSEMBLY | 58910C | - | - | - |
| *A | for TMC Made | *B | for TMMF Made |
Use the same procedure for the RHD and LHD.
The following procedure is for LHD.
55475B
1.REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL GARNISH
|
Remove in this Direction | - | - |
55431A
2.REMOVE INSTRUMENT PANEL FINISH PANEL
|
Remove in this Direction | - | - |
55432B
3.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL
|
Remove in this Direction | - | - |
55407B
4.REMOVE SWITCH HOLE BASE SUB-ASSEMBLY
The illustrations are representative examples, and details may differ.
|
Remove in this Direction | - | - |
33504F
5.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for CVT)
33504F
6.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)
|
Remove in this Direction | - | - |
33554
7.REMOVE SHIFT LEVER CAP (for CVT)
Using a screwdriver with its tip wrapped in protective tape, disengage the claws to remove the shift lever cap.
When removing the shift lever cap, if the screwdriver is lowered in the direction opposite to the one shown in the illustration, the cap could be damaged as a result.
Be careful not to damage the shift lever cap and position indicator housing.
Using a screwdriver with its tip wrapped in protective tape, push the shift lock release button to move the shift lever to N.
Be careful not to damage the floor shift lever assembly.
58810J
8.REMOVE CONSOLE BOX ASSEMBLY
| *A | w/o Wireless Charger | *B | w/ Wireless Charger |
|
Remove in this Direction | - | - |
9.REMOVE NO. 1 BOX SIDE PANEL (for TMC Made)
|
Remove in this Direction | - | - |
58912C
10.REMOVE NO. 2 BOX SIDE PANEL (for TMC Made)
Use the same procedure as for the No. 1 side.
58903A
11.REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY (for TMC Made)
|
Remove in this Direction | - | - |
58857A
12.REMOVE UPPER NO. 1 CONSOLE SUPPORT BRACKET (for TMC Made)
58818A
13.REMOVE CONSOLE BOX FRONT COVER (for TMC Made)
58912C
14.REMOVE NO. 2 BOX SIDE PANE (for TMMF Made)
|
Remove in this Direction | - | - |
58911A
15.REMOVE NO. 1 BOX SIDE PANE (for TMMF Made)
Use the same procedure as for the No. 2 side.
16.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (for TMMF Made)
|
Remove in this Direction | - | - |
58805C
17.REMOVE REAR UPPER CONSOLE PANEL
| *A | except AWD | *B | for AWD |
|
Remove in this Direction | - | - |
58910C
18.REMOVE REAR CONSOLE BOX ASSEMBLY
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |