| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | WASHER NOZZLE SUB-ASSEMBLY | 85035 | ( )
|
- | - |
| ● | Non-reusable part | - | - |
85035
1.REMOVE WASHER NOZZLE SUB-ASSEMBLY
Using a screwdriver with its tip wrapped with protective tape, disengage the claws to separate the washer nozzle sub-assembly.
Disconnect the washer hose to remove the washer nozzle sub-assembly.
Use the same procedure as for the opposite side.