DESCRIPTION
To check for DTCs, connect the GTS to the Data Link Connector 3 (DLC3) of the vehicle.
The GTS displays DTCs, the freeze frame data and a variety of engine data.
The DTCs and freeze frame data can be cleared using the GTS.
Click hereDrivetrain>EC6D (MANUAL TRANSMISSION / TRANSAXLE)>MANUAL TRANSAXLE SYSTEM>DTC CHECK / CLEAR
FUNCTION OF INDICATOR AND WARNING MESSAGE
If the iMT system is malfunctioning, the driver is warned through the iMT indicator and a warning message on the multi-information display in the combination meter assembly.
| DTC | iMT Indicator
(iMT System ON) |
Warning Message | Detail |
|---|---|---|---|
| DTCs are stored | Does not illuminate | Displayed | iMT system malfunction |
| DTCs are not stored | iMT indicator (green) illuminates | Not displayed | iMT system standby condition |
FREEZE FRAME DATA
The ECM records vehicle and driving condition information as freeze frame data the moment a DTC is stored. When troubleshooting, freeze frame data can be helpful in determining whether the vehicle was moving or stationary, whether the engine was warmed up or not and whether the air-fuel ratio was lean or rich, as well as other data recorded at the time of a malfunction.
CHECK DATA LINK CONNECTOR 3 (DLC3)
Check the DLC3.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>GENERAL INFORMATION
CHECK AUXILIARY BATTERY VOLTAGE
Check the auxiliary battery voltage.
11 to 14 V