| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | SYMBOL EMBLEM | 75741E | ( )
|
- | - |
| 2 | NO. 1 BACK DOOR NAME PLATE | 75441E | ( )
|
- | - |
| 3 | NO. 2 BACK DOOR NAME PLATE | 75442A | ( )
|
- | - |
| *A | for HV Model | - | - |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 4 | NO. 3 BACK DOOR NAME PLATE | 75443 | ( )
|
- | - |
| 5 | NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE | - | ( )
|
- | - |
| *A | for HV Model AWD | - | - |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 6 | SIDE PANEL EMBLEM | 75374 | ( )
|
- | - |
| *A | w/ Side Panel Emblem | *B | for LH Side |
| *C | for RH Side | - | - |
| ● | Non-reusable part | - | - |
|
|
| Item | Temperature |
|---|---|
| Vehicle Body | 40 to 60 °C (104 to 140 °F) |
·
Back Door Outside Garnish ·
Name Plates or Emblems |
20 to 30°C (68 to 86°F) |
| *a | Heated Part |
| *b | Heat Light |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Do not heat vehicle body, back door outside garnish and name plates or emblems excessively.
75741E
1.REMOVE SYMBOL EMBLEM
| *a | Location pin | - | - |
Apply protective tape around the symbol emblem as shown in the illustration.
Using a moulding remover D, separate the double-sided tape and disengage the location pins to remove the symbol emblem.
Be careful not to damage the back door outside garnish.
Remove the protective tape.
75441E
2.REMOVE NO. 1 BACK DOOR NAME PLATE (for HV Model)
Apply protective tape around the No. 1 back door name plate as shown in the illustration.
Remove the No. 1 back door name plate.
1. Insert a piano wire between the vehicle body and No. 1 back door name plate.
2. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
3. Pull the piano wire and cut the double-sided tape that holds the No. 1 back door name plate to the vehicle body to remove the No. 1 back door name plate.
Be careful not to damage the vehicle body.
Remove the protective tape.
75442A
3.REMOVE NO. 2 BACK DOOR NAME PLATE
Apply protective tape around the No. 2 back door name plate as shown in the illustration.
Remove the No. 2 back door name plate.
1. Insert a piano wire between the vehicle body and No. 2 back door name plate.
2. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
3. Pull the piano wire and cut the double-sided tape that holds the No. 2 back door name plate to the vehicle body to remove the No. 2 back door name plate.
Be careful not to damage the vehicle body.
Remove the protective tape.
75443
4.REMOVE NO. 3 BACK DOOR NAME PLATE (for HV Model AWD)
Apply protective tape around the No. 3 back door name plate as shown in the illustration.
Remove the No. 3 back door name plate.
1. Insert a piano wire between the vehicle body and No. 3 back door name plate.
2. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
3. Pull the piano wire and cut the double-sided tape that holds the No. 3 back door name plate to the vehicle body to remove the No. 3 back door name plate.
Be careful not to damage the vehicle body.
Remove the protective tape.
5.REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
Apply protective tape around the No. 2 luggage compartment door name plate as shown in the illustration.
Remove the No. 2 luggage compartment door name plate.
1. Insert a piano wire between the vehicle body and No.2 luggage compartment door name plate.
2. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
3. Pull the piano wire and cut the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body to remove the No. 2 luggage compartment door name plate.
Be careful not to damage the vehicle body.
Remove the protective tape.
75374
6.REMOVE SIDE PANEL EMBLEM (w/ Side Panel Emblem)
Apply protective tape around the side panel emblem as shown in the illustration.
Remove the side panel emblem.
1. Insert a piano wire between the vehicle body and side panel emblem.
2. Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
3. Pull the piano wire and cut the double-sided tape that holds the side panel emblem to the vehicle body to remove the side panel emblem.
Be careful not to damage the vehicle body.
Remove the protective tape.
Use the same procedure for the RH side and LH side.