| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | COOLER DRYER | 88474 | ( )
|
- | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
|
for Gasoline Model (for HFC-134a(R134a)):
Compressor oil ND-OIL 8 or equivalent for Gasoline Model (for HFO-1234yf(R1234yf)): Compressor oil ND-OIL 12 or equivalent for HV Model: Compressor oil ND-OIL 11 or equivalent |
- | - |
88474
1.INSTALL COOLER DRYER
| *a | Modulator | *b | Cup |
Using needle-nose pliers, install a new cooler dryer to the modulator.
Sufficiently apply compressor oil to the 3 O-rings and fitting surfaces of a new cap.
for Gasoline Model (HFC-134a(R134a)):
ND-OIL 8 or equivalent
for Gasoline Model (HFO-1234yf(R1234yf)):
ND-OIL 12 or equivalent
for HV Model:
ND-OIL 11 or equivalent
Keep the O-rings and O-ring fitting surfaces free from dirt or foreign matter.
Using a 14 mm straight hexagon, install the cap to the modulator.