| *1 | INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY | *2 | AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY |
| *3 | AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY | *4 | DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY |
Use the same procedure for LHD and RHD vehicles.
The following procedure is for LHD vehicles.
55901D
1.INSTALL NO. 1 HEATER CONTROL SUB-ASSEMBLY
| *a | Alignment Mark | - | - |
Engage the claws to install the No. 1 heater control sub-assembly as shown in the illustration.
Before installing the No. 1 heater control sub-assembly, align the alignment mark of the dial side with the alignment mark of the cable side as shown in the illustration.
55903A
2.INSTALL NO. 3 HEATER CONTROL SUB-ASSEMBLY
| *a | Alignment Mark | - | - |
Engage the claws to install the No. 3 heater control sub-assembly as shown in the illustration.
Before installing the No. 3 heater control sub-assembly, align the alignment mark of the dial side with the alignment mark of the cable side as shown in the illustration.
55902E
3.INSTALL NO. 2 HEATER CONTROL SUB-ASSEMBLY
4.INSTALL INSTRUMENT CLUSTER FINISH LOWER CENTER PANEL SUB-ASSEMBLY WITH NO. 2 HEATER CONTROL SUB-ASSEMBLY
| *a | Alignment Mark | - | - |
Engage the claws to install the instrument cluster finish lower center panel sub-assembly with No. 2 heater control sub-assembly as shown in the illustration.
Before installing the instrument cluster finish lower center panel sub-assembly with No. 2 heater control sub-assembly, align the alignment mark of the dial side with the alignment mark of the cable side as shown in the illustration.
Connect the 3 connectors.
Engage the clips to install the instrument cluster finish lower center panel sub-assembly with No. 2 heater control sub-assembly.
55480D
5.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY