Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model TMMF Made) › from 2021.07
RM3700E _54 Brake _093745 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0483473 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model TMMF Made) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model TMMF Made)  C052696  Steering Angle Sensor Module Component Internal Failure  


DESCRIPTION

This DTC is stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the steering sensor.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from Priority
C052696 Steering Angle Sensor Module Component Internal Failure With the +BS terminal voltage between 9.6 and 16.5 V, a steering sensor internal malfunction signal is received from the steering sensor. Steering sensor Brake/EPB A

PROCEDURE

1.REPLACE STEERING SENSOR

NEXT

END