Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF RACK › from 2021.07
RM3700E _59 Vehicle Exterior _093282 EXTERIOR PANELS / TRIM _0483104 ROOF RACK A

EXTERIOR PANELS / TRIM  ROOF RACK  REASSEMBLY  


CAUTION / NOTICE / HINT

COMPONENTS (REASSEMBLY)
B614996N02
1.417,2 4.417,3.667 3,1.667 3.26,2.344 3.594,2.344 false 4.167,3.833 4.5,4.167 4.5,4.167 4.667,4.167 false 1.875,2.531 2.208,2.531 false 1.875,3.385 2.208,3.385 false 3.26,3.198 3.594,3.198 false 4.885,1.635 5.219,1.635 false 5.531,1.625 5.823,1.406 5.823,1.406 5.99,1.406 false 1.417,2.833 4.417,2.833 false 2.583,3.219 2.865,3.573 0.281,0.354 18 false 1 6.396,1.208 6.677,1.563 0.281,0.354 18 false 3 5.083,4.031 5.365,4.385 0.281,0.354 18 false 4 4.688,1.479 4.969,1.833 0.281,0.354 18 false 5 4.542,1.542 4.698,1.74 0.156,0.198 10 false ● 6.25,1.26 6.406,1.458 0.156,0.198 10 false ● 3.833,2.229 3.99,2.427 0.156,0.198 10 false ● 2.469,2.417 2.625,2.615 0.156,0.198 10 false ● 2.458,3.271 2.615,3.469 0.156,0.198 10 false ● 3.844,3.083 4,3.281 0.156,0.198 10 false ● 4.917,4.083 5.073,4.281 0.156,0.198 10 false ● 4.01,3.031 4.292,3.385 0.281,0.354 18 false 1 2.615,2.365 2.896,2.719 0.281,0.354 18 false 2 3.969,2.167 4.25,2.521 0.281,0.354 18 false 2 1.479,2.031 1.854,2.271 0.375,0.24 12 false *A 1.479,2.865 1.854,3.104 0.375,0.24 12 false *B

Procedure Part Name Code
Z101186

Z101188

Z101187

1 NO. 2 ROOF CARRIER SEAL 63437A (Click here) - -
2 ROOF CARRIER SEAL 63437C (Click here) - -
3 ROOF CARRIER SEAL 63437C (Click here) - -
4 NO. 1 ROOF CARRIER PROTECTOR 63444 (Click here) - -
5 REAR ROOF RACK RETAINER 63454F - - -

*A except Panoramic Moon Roof *B for Panoramic Moon Roof
● Non-reusable part - -

CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the LH side and RH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 63437A 1.INSTALL NO. 2 ROOF CARRIER SEAL (for Panoramic Moon Roof)

a.
B614998N01
2.344,0.052 2.604,0.375 0.26,0.323 18 false i 0.49,1.375 0.75,1.698 0.26,0.323 18 false ii

i.

Clean the roof rack assembly.

1.

Using a heat light, heat the roof rack assembly.

Standard:
Item Temperature
Roof Rack Assembly 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the roof rack assembly excessively.


2.

Remove any remaining double-sided tape from the roof rack assembly.

NOTICE:
·

Installing the No. 2 roof carrier seal with some double-sided tape remaining may cause poor adhesion. Perform this procedure until the tape is sufficiently removed.

·

Make sure to use a cloth when removing. Using a screwdriver, etc., may cause damage and poor adhesion.



3.

Wipe off any tape adhesive residue with cleaner.



ii.

Install the 2 new No. 2 roof carrier seal.

1.

Using a heat light, heat the roof rack assembly.

Standard:
Item Temperature
Roof Rack Assembly 20 to 30°C (68 to 86°F)


CAUTION:
·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the roof rack assembly excessively.


2.

Remove the release paper from the 2 No. 2 roof carrier seals.

NOTICE:

After removing the release paper, keep the exposed adhesive free from foreign matter.


3.

Install the 2 No. 2 roof carrier seals as shown in the illustration.

NOTICE:

Press the No. 2 roof carrier seal firmly to install it.





Hide 63437C 2.INSTALL ROOF CARRIER SEAL (except Panoramic Moon Roof)

a.
B618166N01
2.365,0.031 2.646,0.385 0.281,0.354 18 false i 0.479,1.375 1.031,1.729 0.552,0.354 18 false ii

i.

Clean the roof rack assembly.

1.

Using a heat light, heat the roof rack assembly.

Standard:
Item Temperature
Roof Rack Assembly 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the roof rack assembly excessively.


2.

Remove any remaining double-sided tape from the roof rack assembly.

NOTICE:
·

Installing the 2 roof carrier seals with some double-sided tape remaining may cause poor adhesion. Perform this procedure until the tape is sufficiently removed.

·

Make sure to use a cloth when removing. Using a screwdriver, etc., may cause damage and poor adhesion.



3.

Wipe off any tape adhesive residue with cleaner.



ii.

Install the 2 new roof carrier seals.

1.

Using a heat light, heat the roof rack assembly.

Standard:
Item Temperature
Roof Rack Assembly 20 to 30°C (68 to 86°F)


CAUTION:
·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the roof rack assembly excessively.


2.

Remove the release paper from the 2 roof carrier seals.

NOTICE:

After removing the release paper, keep the exposed adhesive free from foreign matter.


3.

Install the 2 roof carrier seals as shown in the illustration.

NOTICE:

Press the 2 roof carrier seals firmly to install it.





Hide 63437C 3.INSTALL ROOF CARRIER SEAL

a.
B618167N01
2.365,0.031 2.646,0.385 0.281,0.354 18 false i 0.49,1.375 1.042,1.729 0.552,0.354 18 false ii

i.

Clean the roof rack assembly.

1.

Using a heat light, heat the roof rack assembly.

Standard:
Item Temperature
Roof Rack Assembly 20 to 30°C (68 to 86°F)


CAUTION:
E306500C23
2.365,2 2.698,2 false 0.5,2.333 0.5,2.667 true 0.427,2.708 0.74,2.865 0.313,0.156 10 false *a 2.76,1.927 3.073,2.083 0.313,0.156 10 false *b
*a Heated Part
*b Heat Light


·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the roof rack assembly excessively.


2.

Remove any remaining double-sided tape from the roof rack assembly.

NOTICE:
·

Installing the roof carrier seal with some double-sided tape remaining may cause poor adhesion. Perform this procedure until the tape is sufficiently removed.

·

Make sure to use a cloth when removing. Using a screwdriver, etc., may cause damage and poor adhesion.



3.

Wipe off any tape adhesive residue with cleaner.



ii.

Install a new roof carrier seal.

1.

Using a heat light, heat the roof rack assembly.

Standard:
Item Temperature
Roof Rack Assembly 20 to 30°C (68 to 86°F)


CAUTION:
·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the roof rack assembly excessively.


2.

Remove the release paper from the roof carrier seal.

NOTICE:

After removing the release paper, keep the exposed adhesive free from foreign matter.


3.

Install the roof carrier seal as shown in the illustration.

NOTICE:

Press the roof carrier seal firmly to install it.





Hide 63444 4.INSTALL NO. 1 ROOF CARRIER PROTECTOR

a.
B612661C02
1.531,2.427 1.104,2.49 false 5.979,2.448 6.396,2.469 false 2.49,0.177 2.771,0.531 0.281,0.354 18 false i 0.635,0.875 0.917,1.229 0.281,0.354 18 false ii 0.938,2.417 1.229,2.635 0.292,0.219 10 false *a 6.448,2.438 6.729,2.792 0.281,0.354 10 false *a 1.573,2.573 1.729,2.771 0.156,0.198 10 false A 5.865,2.563 6.021,2.76 0.156,0.198 10 false B
*a Rib - -


Standard Measurement:
Area Measurement Area Measurement
A 0 to 2.0 mm (0 to 0.0787 in.) B 0 to 7.0 mm (0 to 0.276 in.)


i.

Clean the roof rack assembly.

1.

Using a heat light, heat the roof rack assembly.

Standard:
Item Temperature
Roof Rack Assembly 20 to 30°C (68 to 86°F)


CAUTION:
·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the roof rack assembly excessively.


2.

Remove any remaining double-sided tape from the roof rack assembly.

NOTICE:
·

Installing the No. 1 roof carrier protector with some double-sided tape remaining may cause poor adhesion. Perform this procedure until the tape is sufficiently removed.

·

Make sure to use a cloth when removing. Using a screwdriver, etc., may cause damage and poor adhesion.



3.

Wipe off any tape adhesive residue with cleaner.



ii.

Install a new No. 1 roof carrier protector.

1.

Using a heat light, heat the roof rack assembly.

Standard:
Item Temperature
Roof Rack Assembly 20 to 30°C (68 to 86°F)


CAUTION:
·

Do not touch the heat light and heated parts.

·

Touching the heat light may result in burns.

·

Touching heated parts for a long time may result in burns.



NOTICE:

Do not heat the roof rack assembly excessively.


2.

Remove the release paper from the No. 1 roof carrier protector.

NOTICE:

After removing the release paper, keep the exposed adhesive free from foreign matter.


3.

Install the No. 1 roof carrier protector as shown in the illustration.

NOTICE:

Press the No. 1 roof carrier protector firmly to install it.





Hide 63454F 5.INSTALL REAR ROOF RACK RETAINER