| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | ROOF DRIP SIDE FINISH MOULDING | 75552E | ( )
|
- | - |
| *A | except Panoramic Moon Roof | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 2 | REAR ROOF DRIP SIDE FINISH MOULDING | 75554A | ( )
|
- | - |
| *A | for Panoramic Moon Roof | - | - |
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
75552E
1.REMOVE ROOF DRIP SIDE FINISH MOULDING (except Panoramic Moon Roof)
Apply protective tape around the roof drip side finish moulding.
Disengage the No. 1 roof drip side finish moulding clips to remove the roof drip side finish moulding.
Do not remove the No. 1 roof drip side finish moulding clips.
If a No. 1 roof drip side finish moulding clip is damaged or falls off, replace it with a new one.
75554A
2.REMOVE REAR ROOF DRIP SIDE FINISH MOULDING (for Panoramic Moon Roof)
Apply protective tape around the rear roof drip side finish moulding.
Disengage the clips to remove the rear roof drip side finish moulding.
Do not remove the No. 1 rear roof drip side finish moulding clips.
If a No. 1 rear roof drip side finish moulding clip is damaged or falls off, replace it with a new one.