Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type with TAS Type) › from 2021.07
RM3700E _56 Audio / Visual / Telematics _093686 AUDIO / VIDEO _0484174 AUDIO AND VISUAL SYSTEM(for Radio and Display Type with TAS Type) D

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio and Display Type with TAS Type)  OPERATION CHECK  


CHECK SPEAKER


HINT:
·

This function is used when checking the speaker wiring and whether the speakers are functioning properly.

·

Illustrations may differ from the actual vehicle screen depending on the device settings and options. Therefore, some detailed areas may not be shown exactly the same as on the actual vehicle screen.




b.
E463233

Select "Speaker Test: Start" from the "System Overview" screen.


c.

Check whether beep tones from each speaker.

HINT:
·

"Speaker Test: Stop" is displayed during the speaker check.

·

Speaker test will loop until "Speaker Test: Stop" is selected again.

·

Beep tone will be played clockwise from front LH side.

·

The sounding order during speaker check cannot be adjusted.