Turn the light control switch to the tail or head position.
Check that the daytime screen setting on the display adjustment screen is set to on.
| Result | Proceed to |
|---|---|
| Daytime screen setting is set to on. | A |
| Daytime screen setting is set to off. | B |
A
B
Check for color of status indicators.
| Result | Proceed to |
|---|---|
| CAN communication is red | A |
| CAN communication indicator is green | B |
A
for Gasoline Model:
B
Enter the "System Parameters" screen. Refer to system parameter list in System Parameter.
Check that the display changes between ON and OFF according to the light control switch operation.
| Light Control Switch | Display |
|---|---|
| Tail or head | ON |
| Off or AUTO | OFF |
The display is updated once per second. It is normal for the display to lag behind the actual switch operation.
Make sure to move the vehicle to a bright area before performing an operation check with the light control switch in the AUTO position.
| Proceed to |
|---|
| OK |
| NG |
OK
NG