| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | PRECAUTION | - | ( )
|
- | - |
| 2 | FRONT SEAT CENTER AIRBAG ASSEMBLY | 739H0 | ( )
|
- | - |
| 3 | FRONT SEAT AIRBAG ASSEMBLY | 73910A | ( )
|
- | - |
| 4 | SEPARATE TYPE FRONT SEATBACK COVER WITH PAD | - | - | - | - |
| *1 | SEAT COVER HANGER | *2 | SEATBACK COVER HOOK |
|
Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf) | ● | Non-reusable part |
Use the same procedure for the LHD and RHD vehicles.
The procedure listed below is for the LHD vehicles.
Use the same procedure for the LH and RH sides.
The procedure listed below is for the LH side.
1. PRECAUTION
|
|
739H0
2.INSTALL FRONT SEAT CENTER AIRBAG ASSEMBLY
Install the front seat center airbag assembly with 2 new nuts.
Do not reuse the nut.
If the installation surface or surrounding area of the front seat airbag assembly is deformed or damaged, replace the front seatback frame sub-assembly LH with a new one.
Engage the clamp.
73910A
3.INSTALL FRONT SEAT AIRBAG ASSEMBLY
Install the front seat center airbag assembly with 2 new nuts.
Do not reuse the nut.
If the installation surface or surrounding area of the front seat airbag assembly is deformed or damaged, replace the front seatback frame sub-assembly LH with a new one.
Engage the clamp.
4.INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD
Front seat assembly (for Manual seat):
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Manual Seat)>REASSEMBLY
Front seat assembly (for Power seat):
Click hereVehicle Interior>SEAT>FRONT SEAT ASSEMBLY (for Power Seat)>REASSEMBLY